How To Make Cardboard Look Like Metal – Easy Guide

Making cardboard look like metal is a great way to add a touch of luxury to any project. There are several ways to achieve this look, and each has its own unique benefits.

Paint is the most common way to make cardboard look like metal. You can use any color of paint to achieve this look, but metallics will give the most realistic results. You can also use a sealant or spray paint to make your cardboard look like metal.

In the rest of this article we are going to explore further how to make cardboard look like metal using different methods.

How to make cardboard look like metal using paint

To make cardboard look like metal, apply a metallic paint in a silver, gold or bronze color. You can also use a metallic spray paint to create a shiny finish. Let the paint dry completely before moving on to the next step.

For best results, use a primer before painting. This will help the paint adhere better to the cardboard and give it a metallic sheen.

If you want to add some texture to the cardboard, use a textured spray paint. This will give it a rough, metal look.

Once you’re finished painting, seal the cardboard with a clear sealer to protect it from wear and tear.

Now enjoy your newly decorated cardboard. It’ll look great in any room of the house.

How to make cardboard look like metal with a sealant

One way to make cardboard look like metal is to seal it with a sealant. This will create a shiny, metallic finish.

Read  Clay Bead Bracelet Ideas - Disc Beads And Other Great Designs

To do this you will need:

  • A sealant (you can find this at most hardware stores)
  • A paintbrush
  • Cardboard

After getting your supplies ready you can follow the very simple 3 step guide below:

  • Begin by applying the sealant to the cardboard with the paintbrush. Make sure to cover the entire surface evenly.
  • Allow the sealant to dry completely. This usually takes around 24 hours.
  • Once dry, your cardboard will now have a shiny, metallic finish.

Keep in mind that this method will make the cardboard more fragile, so be careful when handling it. You may also want to consider sealing both sides of the cardboard for added durability.

How to make cardboard look like metal with spray paint

Take a piece of cardboard and draw the shape of the metal you want to create. Cut out the shape and then use a spray paint in the corresponding color.

Make sure to let the paint dry completely before moving on to the next step.

Once the paint is dry, take some fine grit sandpaper and lightly sand over the entire surface of the cardboard.

This will give it a metallic sheen. If you’d like, you can also apply a clear sealant to protect the paint from scratches and fading.

You can also use this technique to create other metal-looking objects, like picture frames or vases. Just be creative and have fun.

How to make cardboard look like metal with metallic paint

Adding a metallic paint to cardboard can give it the look of metal. To do this, you will need:

  • Cardboard
  • Metallic paint
  • Paintbrush
  • Masking tape
  • Pencil
  • Scissors

Now follow the steps below to finish the job.

  • Cut the cardboard to the desired shape and size.
  • Tape off any areas that you do not want painted with masking tape.
  • Paint the entire surface with metallic paint.
  • Let dry and remove masking tape.
Read  What Weight Yarn Is The Best For Crocheted Doilies?

To get the best possible result, use high-quality metallic paint and cardboard. If you want a distressed metal look, you can also lightly sand the surface after painting.

Always be sure to test your paint on a small area of the cardboard first to make sure you like the color and finish.

How to make cardboard look like metal with gold leafing

Gold leafing is a great way to make cardboard look like metal. All you need is some gold leaf, a brush, and some adhesive.

First, cut the cardboard into the desired shape and size.

Next, apply the adhesive to the back of the gold leaf and press it onto the cardboard.

Finally, brush over it with a light coat of adhesive to seal it in place.

If done properly it can be hard to tell the diffrence between cardboard and metal.

Gold leafing is a great way to make small pieces of furniture, or picture frames look luxurious without spending a lot of money.

It is not the easiest material to work with and takes some practice to get it looking its best, but the end result is worth it.

Here are some tips on how to make gold leafing look its best:

  • Use a thin layer of adhesive so that the gold leaf doesn’t wrinkle.
  • Be careful not to brush over the gold leaf too much or it will start to flake off.
  • It’s better to apply multiple thin layers of gold leaf rather than one thick layer.

Gold leafing can be a bit tricky to master, but once you get the hang of it you’ll be able to create beautiful pieces of art. With a little practice, anyone can make cardboard look like metal.

How to make cardboard look like metal with aluminum foil

To make cardboard look like metal, cover it in aluminum foil. The foil will reflect light and give the cardboard a metallic appearance.

Read  Does Kinetic Sand Dry Out? How To Prevent It From Going Bad

Of course, this is an easy way and not necessarily what you are looking for.

If you want to make cardboard look like metal, use silver spray paint or any other metallic color.

You can also add a layer of mod podge before painting to give the cardboard a more textured appearance.

Another way to make cardboard look like metal is to use metallic duct tape. This will give the cardboard a shiny, metallic finish.

For a more rustic look, use copper spray paint or bronze paint. These colors will give the cardboard a weathered, metal appearance.

Whatever method you choose, make sure to practice on a piece of scrap cardboard first. This will help you get the perfect look for your project.

How to make cardboard look like metal with a patina finish

There are quite a few ways to make cardboard look like metal. One way is to use a patina finish.

A patina finish is a type of finish that gives your object the appearance of age or corrosion. There are many different types of patinas, and each one will give your object a different look. You can find patina finishes at most craft stores.

To apply a patina finish to cardboard, you will need:

  • A piece of cardboard
  • A patina kit
  • A paintbrush

Good. We have everything ready. Now it is time to get the work done.

  • Begin by cleaning your piece of cardboard. Make sure there is no dust or dirt on the surface.
  • Next, follow the instructions included in your patina kit to create the desired effect.
  • Once you have created the patina, allow it to dry completely.
  • Finally, use a paintbrush to apply a clear sealant to the surface of your object. This will help to protect the patina and keep it looking its best.

That’s it. You’ve now learned how to make cardboard look like metal with a patina finish. Give it a try and see how you like the results.