Your bathing suit top is too big and you don’t want to sew it. You might think that the only solution is to buy a new bathing suit, but that can be expensive and time-consuming. There is a simple solution to this problem using a safety pin. Here’s how to fix a bathing suit top too big without sewing:
- Put on the bathing suit top and look in the mirror. Determine where the safety pin needs to go in order to take up some of the excess fabric.
- Take the bathing suit top off and put a safety pin through the fabric. Make sure that the pin is secure.
- Put the bathing suit top back on and make sure that the safety pin is not visible. You may need to adjust the position of the safety pin until it is hidden.
Enjoy your new, well-fitting bathing suit top. There is also another solution that is more of a very quick fix.
If your bathing suit top is too big, you can fix it without sewing. Just wrap a piece of tape or an elastic band around the bottom of the top so that it fits more snugly. This will help to hold the top in place and prevent it from slipping off.
If you want to do more you can try sewing the top in place, or sewing a new back strap to provide extra support.
Whatever approach you choose, just make sure that your bathing suit top fits comfortably and doesn’t fall down while you’re enjoying the water.
Table of Contents
Determine how much excess fabric you need to remove
The first thing to do if you want to fix a bathing suit top that is too big is to determine how much excess fabric you need to remove.
You may need to take off anywhere from an inch up to several inches, which will depend on how baggy the bathing suit is and where it needs adjusting.
Mark out your desired amount of excess material on the top with a fabric marker or chalk, then trim away that section using sharp scissors.
If you want to make the swimsuit fit more snugly in other areas as well, use hot glue to adhere lightweight elastic strips directly onto the edges of the bathing suit top.
This should help keep it fitting more securely without putting too much pressure on any particular area. Once you have glued all of your strips in place, let them dry completely before wearing your swimsuit again.
Another option is to hand-sew a piece of elastic onto the inside edge of the bathing suit top.
This will also help keep it more snug without being uncomfortable, and you can adjust the tightness as needed by simply changing how close together you sew the stitches.
Once you have finished making all your adjustments, try on the bathing suit top again to make sure it fits properly.
If everything looks good, go ahead and enjoy your time in the sun.
Cut off the excess fabric being careful not to cut into the stitching
You should cut off the excess fabric while being very careful not to cut into the stitching. This will help the bathing suit top fit better.
You can then use fabric glue or a hot glue gun to attach the excess fabric to the inside of the top. This will create a gathered look that is flattering and will also help the top fit better.
Hem the edges of the fabric so it doesn’t fray
After cutting off the excess fabric you need to hem the edges so it doesn’t fray. You can do this without sewing by using fabric glue or a hot glue gun.
This will help the bathing suit top fit better and also look nicer.
If you don’t have time to fix your bathing suit top, you may want to consider purchasing a new one instead. This will save you the hassle of trying to make repairs on an item that is meant for use in water.
However, if you want to try fixing your bathing suit top yourself, then follow the steps above and you should be able to get it fitting properly in no time.
Put your bathing suit top on and check to make sure it fits properly
After you have fixed your bathing suit top you should check to make sure that it is going to stay put . You can do this by wearing your bathing suit top on a day you know that the waves will be rough at the beach or by simply jumping in and out of the pool.
If you have any doubts about how well your bathing suit top fits, you should consult an expert for advice on fixing it.
You might even need to resort to sewing even though you came to this article to avoid id.
Hopefully with these tips, you will be able to fix your bathing suit top so that it fits properly and stays put.
